Top 11 Best Harley Fuel Injections 2018

 

Daytona Twin Tec Twin Tuner EX Fuel Injection Controllers for 2001-2011 Harley Davidson Twin Cam with Delphi EFI (except 2008-2011 Touring) - Increased horsepower. Improved throttle response. Easy plug-in installation and setup. Allows you to easily adjust your fuel injection to match the requirements of performance parts including camshafts, free flowing exhausts and low restriction air filters you can add or subtract fuel. Very compact sizeonly 4in l x 2in w x 1/2in h.

 

Pingel 62054 Tank Fitting Kit For Harley-Davidson Fuel-Injection to Carburetor Conversion Models ZZ 0705-0031 - S. Pingel 62054 tank fitting kitfits 00-03 models w/ delphi efi (adapter and plug) for use w/ any pingel 22mm valveuse when converting from oem fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement enginekit replaces the factory tank fitting, allowing the use of a high-quality, high-flow pingel fuel valve to feed the carburetormade of stainless steelkits include adapter and plug or adapter only with o-rings or gasketsmade in the u. A. Sold as a kitnote due to tight tolerances in the tank fittings, a pingel fuel valve is the only one that will fit.

 

Pingel 62052 Tank Fitting Kit For Harley-Davidson Fuel-Injection to Carburetor Conversion Models - Pingel 62052 tank fitting kit for harley-davidson fuel-injection to carburetor conversion models.

 

Dynatek Fuel Injection Controller for 2007 Harley Davidson Sportster 883 - Does not require a computer to adjust. Unit is supplied with 3 base “maps” these are predetermined settings the tuner can choose from that are based on standard engine/exhaust system modifications. Gives a full range of adjustment in either direction which is critical for proper tuning. Allows the tuner to both richen the fuel mixture as well as make the fuel mixture leaner contrary to popular belief, in many cases it is necessary to make the fuel curve leaner than stock in certain areas for best power output. Selecting one of these settings puts the fuel curve in a close to optimum range.

 

DYNOJET-HARLEY – POWER COMMANDER V FUEL INJECTION MODULE HARLEY TOURING 2007 15-028 - Below you will find some power commander v features. The new power commander v is loaded with tons of new features. Reduced size from pciiiusb (less than half of the size of pciii) usb powered from computer (9 volt adapter is no longer needed for programming) 2 position map switching function built in (map switch not included) gear input (allows for map adjustment based on gear and speed) analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature) with gear position input connected the pcv is capable of allowing each cylinder to be mapped individually and for each gear (for example on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables). Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes 10 throttle position columns (up from 9 on pciiiusb) enhanced “accel pump” utility (increased adjustment and sensitivity ranges).

 

Daytona Twin Tec Gen 4 Fuel Injection Controller for Harley Davidson 2001-13 Tw - Robust alpha-n (throttle position and rpm based) fuel control eliminates problems with long duration/high overlap camshafts. Fully programmable plug-in replacement for the 36 pin delphi controller with j1850 data bus not compatible with 08-12 touring models with electronic throttle control or 11-12 softail 2012 dyna models with can data bus. Manufacturer part no tcfi4-kit. Simultaneously auto-tune fuel curves for front and rear cylinders under actual riding conditions with wego iiid dual channel wide-band oxygen sensor interface. Extended data logging and diagnostics dataflash memory stores full 60 minutes of operating data at 10 samples/second.

 

Accel SLM05 SLM Fuel Injection Module for Harley Davidson - Simply plug it in and ride. Automatically compensates for changing loads and weather conditions and altitude. Recalibration optimizes for modifications such as exhaust pipes, intake air cleaners, cams, etc. Easy installation using direct plug-in connections. Eliminates the bang and pop associated with mis-programmed ecu.

 

Caltric FUEL PUMP Fits HARLEY DAVIDSON ELECTRA GLIDE INJECTION CLASSIC EFI FLHTCI FLHTC 1999 - Used on harley davidson electra glide injection classic efi flhtci flhtc 1999.

 

Kuryakyn 9217 Wild Things Fuel Injection Controller (ea) for All Harley-Davidson 02-05 V-Rod Models - Kuryakyn 9217 wild things fuel injection controller (ea) for all harley-davidson ’02-’05 v-rod modelswild things® has teamed with dobeck performance to bring you an easy and affordable way to adjust your fuel injection system to accommodate modifications to your motorcycle’s exhaust system, air cleaner, or engine components. The wild things® fuel injection controller is load based. M. M. P. P. Wild things® fuel injection controllers offer plug and play installation. , It also takes into account the load the engine is under. The wild things® fuel injection controller allows you to tune the fuel injection much the same way you jet a carburetor. Aside from reading throttle position and r. There is no need to compromise the integrity of the stock wire harness. Even though you may encounter the same throttle positions at the same r. S in different riding situations, the engine’s fuel requirement may not be the same because the engine may not be under the same load. Utilizing patent pending stealth technology, our control modules are compatible with all ’95-’06 harley-davidson models.

 

Pingel 62079 Tank Fitting Kit For Harley-Davidson Fuel-Injection to Carburetor Conversion - A. Sold as a kitnote due to tight tolerances in the tank fittings, a pingel fuel valve is the only one that will fit. Pingel 62079 tank fitting kit fits 07-present xl models for use w/ any pingel ¼” npt valve&#9use when converting from oem fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement engine&#9kit replaces the factory tank fitting, allowing the use of a high-quality, high-flow pingel fuel valve to feed the carburetor    &#9made of stainless steel&#9kits include adapter and plug or adapter only with o-rings or gasket&#9made in the u. S.

 

Dobeck EJK Fuel Injection Controller for Harley Davidson Touring w/ Bypass 2008-2009  RECOMMENDED, EFI Programmer - Offers full range tunability. Uses unique load based technology. Plug-n-play installation takes minutes to install, all base settings are preset. No computer needed, no dyno required. Does not interfere with stock ecu operation.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.