Best and Coolest 39 Atv Lifts

 

Xtreme Products XTPRZR10 ATV Lift Kit - All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability. Increase ground clearance. Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty. Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff. Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain.

 

High Lifter Products PLK1RZR-50-O ATV Lift Kit - Increases the space between the tires and fender to allow large tires to be mounted. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. The rear lift rotates the rear axle and raises the atv. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks.

 

High Lifter Products PLK1RZR-51 ATV Lift Kit - The rear lift rotates the rear axle and raises the atv. Increases the space between the tires and fender to allow large tires to be mounted. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks.

 

Xtreme Products XTPACE ATV Lift Kit - All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability. Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff. Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty. Increase ground clearance. Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain.

 

High Lifter Products HLK500R-50 ATV Lift Kit - The rear lift rotates the rear axle and raises the atv. Increases the space between the tires and fender to allow large tires to be mounted. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks.

 

Rage Powersports BW-PROLIFT-HD-SE Black Widow ProLift Side Extension Panel Kit for ATV’s and Lawn Tractors Add-on - Designed for use with the bw-prolift-hd motorcycle lift table. Adds 24″ width to the prolift to handle wider wheelbase vehicles such as atv’s and garden tractors. Includes all necessary hardware for installation on the table lift. Easily installs in a matter of minutes. Heavy duty steel construction.

 

Warn Industries PROVAN ATV LIFT EXT KIT Plow Blades EXTENSION FOR CLEARANCE ISSUES – 82012 - Designed with an interlocked rotating base for great strength, outstanding durability and excellent impact resistance. Features an extra-wide design for increased stability and durability. The blade trip system enables the blade to trip forward when striking an immovable object.

 

High Lifter Products PLK9RZRT-50 ATV Lift Kit - Increases the space between the tires and fender to allow large tires to be mounted. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. The rear lift rotates the rear axle and raises the atv. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible.

 

High Lifter Products PLK1RZR-50-R ATV Lift Kit - The rear lift rotates the rear axle and raises the atv. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. Increases the space between the tires and fender to allow large tires to be mounted.

 

SuperATV Polaris Ranger 400/500 Midsize 2-IN Lift Kit LK-P-RAN400-2 - Components are precision cut and zinc plated for extreme durability. When combined with larger tires and wheels your machine becomes even more extreme. Super atv lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability. You are sure to stand out and out perform. This lift kit is an easy, bolt-on system that when installed with stock tires and wheels increases your front and rear ground clearance by about 2″ on average. Features front and rear lift, zinc plated for extreme durability, room for larger tires, complete with all necessary hardware and easy-to-follow instructions if you are using 12″ wheels, this kit will occasionally require wheel spacers. This product is backed by a super atv lifetime warranty. Perfect for any type of riding, whether you are on the trails, farm, hills, creek, or sand. 2″ polaris ranger lift kit will fit polaris ranger 400/500 2010-2014 if you have a 2011, we recommend you use rhino brand rear axles. Upgrade your machine with a super atv 2″ lift kit.

 

BlackPath – Polaris 2″ Lift Kit Sportsman 500 + 600 + 700 + 800 ATV Suspension Lift (Black) T6 Billet - Includes 2x front spring spacers, 2x rear lift brackets, and installation hardware. Lifts your atv 2″ above stock height. Includes detailed instructions. Fits 1999, 2010 polaris sportsman 500, 600, 700, & 800. Cnc machined from aerospace-grade billet aluminum and anodized black for maximum protection from the elements.

 

High Lifter ATV Lift Kit – Polaris (All Models), 425 Magnum 4×4 (99-05′) - Increases the space between the tires and fender to allow large tires to be mounted. Rear lift rotates the rear axle and raises the atv. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension. Increases ground clearance by 2″ by itself and 5″ when combined with larger diameter tires.

 

High Lifter Products PLK1RZR-50 ATV Lift Kit - Increases the space between the tires and fender to allow large tires to be mounted. The rear lift rotates the rear axle and raises the atv. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks.

 

QUADBOSS ATV LIFT KIT STAINLESS KAWASAKI MULE 600 610 - One of the most common reasons why our customers buy a quadboss clutch kit is because they have added larger, more aggressive tires to their machine a quadboss clutch kit recalibrates your cvt so you can effectively turn those larger tires well, if you add larger tires you probably also need a lift kit to provide the necessary clearance. Improves ground clearance. Kit contents will vary by model. Lift kits can gain 2-3in of additional clearance.

 

High lifter plk500-03 atv lift kit polaris (PLK500-03) - 5″ spacers are required if customer wants  to run factory wheels with this lift kit installed 5    note/warning new “rear” hlp pro series or gorilla cv axles are recommended for ”11-”12 ranger before installing of any brand of lift kit. 2    note does not fit commander 100x model with fox shocks this kit does not work with the hlp spring tool 3    does not work on any models equipped with cabs 4    polaris 500 ranger & ranger crew note 1. High lifter plk500-03 atv lift kit polaris (plk500-03) increases ground clearance by 2″ by itself and when combined with larger diameter tires increases of up to 5″ are possible lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks the rear lift rotates the rear axle and raises the atv increases the space between the tires and fender to allow large tires to be mounted     foot notes 1    1″ spacers are required on the rear if you run factory wheels with a lift kit installed. All customers should be aware of these risk 6    note  be sure to always check cv boot clearance at strut housing during installation as you may have to grind aluminum strut housing to create  sufficient clearance for cv boots (even if you are running stock cv axles) we had to clearance the strut housing on the ”11 model sportsman we tested with 7    on ”11-”12 models the customer must upgrade to a hlp rear axle bar replacement kit (63-69122) models with a lift kit installed the rear axles bind when the suspension is at full extension /droop and are subject to break. The ”11-”12 model rangers have lighter duty rear axles than  previous year models and are more prone to breakage. 8    on ”11-”12 models the cu.

 

High Lifter ATV Lift Kit – Polaris (All Models), 800 Sportsman (06′) - Rear lift rotates the rear axle and raises the atv. Increases ground clearance by 2″ by itself and 5″ when combined with larger diameter tires. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension. Increases the space between the tires and fender to allow large tires to be mounted.

 

MoJack 35801 Motorcycle and ATV Lift - The lift is ideal for lifting your motorcycle or atv to easily change tires or do maintenance. Mojack has added a new lift for motorcycles and/or atvs.  . This heavy duty hydraulic lift is low profile to fit most road bikes.

 

Bundle 2 items: Super ATV Lift Kit for Arctic Cat 650, 400-700i and FREE Unhinged ATV Multi-Tool - Super atv 2″ arctic cat lift kit and free unhinged atv multi-tool upgrade your arctic cat atv with a superatv 2″ lift kit. Kit comes with all necessary hardware and easy-to-follow instructions. When combined with larger tires and wheels your machine becomes even more extreme. Components are precision cut and zinc plated for extreme durability. Perfect for any type of riding, whether you are on the trails, farm, hills, creek, or sand. This lift kit is an easy, bolt-on system that when installed with stock tires and wheels increases your front and rear ground clearance by about 2″ on average. Superatv lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability. You are sure to stand out and out perform. Will fit 400i 2006-07 500i 2005-06 650 vtwin 2004-06 650 hi 2005-07 650 trv 2005-06 700 efi se 2006-07.

 

Xtreme Products XTH552 ATV Lift Kit - Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain. Increase ground clearance. Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty. All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability. Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff.

 

High Lifter Products ATV Lift Kit ALK1000 - Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. The rear lift rotates the rear axle and raises the atv. Increases the space between the tires and fender to allow large tires to be mounted. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks.

 

High Lifter 2″ Signature ATV Lift Kit for Honda Rubicon/Rancher 420/500 - Increases the space between the tires and fender to allow large tires to be mounted. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. The rear lift rotates the rear axle and raises the atv. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible.

 

High Lifter Products PLK1RZR-51-S ATV Lift Kit - Increases the space between the tires and fender to allow large tires to be mounted. The rear lift rotates the rear axle and raises the atv. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks.

 

High lifter plk800r-50 atv lift kit 700/800 efi range r (PLK800R-50) - The ”11-”12 model rangers have lighter duty rear axles than  previous year models and are more prone to breakage. All customers should be aware of these risk 6    note  be sure to always check cv boot clearance at strut housing during installation as you may have to grind aluminum strut housing to create  sufficient clearance for cv boots (even if you are running stock cv axles) we had to clearance the strut housing on the ”11 model sportsman we tested with 7    on ”11-”12 models the customer must upgrade to a hlp rear axle bar replacement kit (63-69122) models with a lift kit installed the rear axles bind when the suspension is at full extension /droop and are subject to break. 2    note does not fit commander 100x model with fox shocks this kit does not work with the hlp spring tool 3    does not work on any models equipped with cabs 4    polaris 500 ranger & ranger crew note 1. 5″ spacers are required if customer wants  to run factory wheels with this lift kit installed 5    note/warning new “rear” hlp pro series or gorilla cv axles are recommended for ”11-”12 ranger before installing of any brand of lift kit. 8    on ”11-”12. High lifter plk800r-50 atv lift kit 700/800 efi range r (plk800r-50) increases ground clearance by 2″ by itself and when combined with larger diameter tires increases of up to 5″ are possible lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks the rear lift rotates the rear axle and raises the atv increases the space between the tires and fender to allow large tires to be mounted     foot notes 1    1″ spacers are required on the rear if you run factory wheels with a lift kit installed.

 

High Lifter Products KLKMPFXT-50 ATV Lift Kit - Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. The rear lift rotates the rear axle and raises the atv. Increases the space between the tires and fender to allow large tires to be mounted.

 

Xtreme Products XTP-900 ATV Lift Kit - All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability. Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff. Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain. Increase ground clearance. Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty.

 

Xtreme Products XTP401 ATV Lift Kit - Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty. All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability. Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain. Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff. Increase ground clearance.

 

Xtreme Products XTPIRS4 ATV Lift Kit - Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff. Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain. Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty. Increase ground clearance. All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability.

 

High Lifter Products CLK1000M-51 ATV Lift Kit - Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. The rear lift rotates the rear axle and raises the atv. Increases the space between the tires and fender to allow large tires to be mounted.

 

Super ATV Polaris RZR XP 1000 3-5 Inch Black Lift Kit - 100% bolt on application for easier installation. This does not work on rzr turbo models. This is a powder coated black 3-5″ adjustable lift kit. Comes with all necessary hardware and installation instructions. This will fit polaris rzr xp 1000 2013+, polaris rzr xp 4 1000 2014+ has heavy duty front and rear shock relocating brackets and rear coil spring spacers.

 

Super ATV 2″ Lift Kit (2011+) Polaris Sportsman 500/600/800 - Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty. Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff. Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain. Increase ground clearance. All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability.

 

High lifter plk700-00 atv lift kit pol 700 sportsman (PLK700-00) - 5″ spacers are required if customer wants  to run factory wheels with this lift kit installed 5    note/warning new “rear” hlp pro series or gorilla cv axles are recommended for ”11-”12 ranger before installing of any brand of lift kit. 8    on ”11-”12 mod. All customers should be aware of these risk 6    note  be sure to always check cv boot clearance at strut housing during installation as you may have to grind aluminum strut housing to create  sufficient clearance for cv boots (even if you are running stock cv axles) we had to clearance the strut housing on the ”11 model sportsman we tested with 7    on ”11-”12 models the customer must upgrade to a hlp rear axle bar replacement kit (63-69122) models with a lift kit installed the rear axles bind when the suspension is at full extension /droop and are subject to break. High lifter plk700-00 atv lift kit pol 700 sportsman (plk700-00) increases ground clearance by 2″ by itself and when combined with larger diameter tires increases of up to 5″ are possible lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks the rear lift rotates the rear axle and raises the atv increases the space between the tires and fender to allow large tires to be mounted     foot notes 1    1″ spacers are required on the rear if you run factory wheels with a lift kit installed. The ”11-”12 model rangers have lighter duty rear axles than  previous year models and are more prone to breakage. 2    note does not fit commander 100x model with fox shocks this kit does not work with the hlp spring tool 3    does not work on any models equipped with cabs 4    polaris 500 ranger & ranger crew note 1.

 

High Lifter Products PLK900R-00 ATV Lift Kit - Increases the space between the tires and fender to allow large tires to be mounted. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. The rear lift rotates the rear axle and raises the atv. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks.

 

Xtreme Products XTH701 ATV Lift Kit - Increase ground clearance. Xtreme products atv lifts provide the maximum lift available without causing costly damage to axles and related drive train components trail friendly lift systems built to get you in and out of the deep stuff. Parts are laser cut then manufactured to exacting tolerances to provide the best value available all xtreme products are backed by a limited lifetime warranty. All xtreme products lift kits are precision engineered using a36 3/16in or 1/4in inch cold roll steel for maximum strength and reliability. Xtreme products lift kits are designed to provide maximum performance, durability, and enhance handling and stability characteristics while keeping installation simple and easy our designs help stabilize the suspension and make your atv more sure-footed over rough terrain.

 

High Lifter Products HLK500-53 ATV Lift Kit - Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. The rear lift rotates the rear axle and raises the atv. Increases the space between the tires and fender to allow large tires to be mounted.

 

Polaris New OEM ATV Lift Plow Hook Strap Kit Sportsman - Polaris new oem atv lift plow hook strap kit sportsman. This is a factory original equipment part, not aftermarket.

 

High Lifter Products HLK700P-50 ATV Lift Kit - The rear lift rotates the rear axle and raises the atv. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible. Increases the space between the tires and fender to allow large tires to be mounted.

 

High Lifter Products PLK800RZRS-50 ATV Lift Kit - The rear lift rotates the rear axle and raises the atv. Lowers the front a-arms similar to the design of lift kits designed for independent front suspension 4wd trucks. Increases the space between the tires and fender to allow large tires to be mounted. Increases ground clearance by 2in by itself and when combined with larger diameter tires increases of up to 5in are possible.

 

Black Path – Arctic Cat 2.5″ Lift Kit 250 + 300 + 400 + 450 + 550 + 650 + 700 ATV Suspension Lift (Polished) T6 Billet - Fits all years for artic cat 250, 300, 400, 450, 550, 650, 700. Built from 6061-t6 aircraft aluminum. Comes with detailed installation instructions. Includes detailed instructions. Our blackpath atv 25” lift spacers are designed to give you the extra clearance you need to make it over those challenging obstacles.

 

BlackPath – Honda 2″ Lift Kit TRX500 Freman with IRS ATV Suspension Lift (Black) T6 Billet - Our kit is engineered to install directly and allow you the use of your stock shocks. We have designed this kit to not limit suspension travel and will allow for more suspension articulation over rough terrain. Bps new atv lift kit raises your foreman 2 inches to increase ground clearance and off-road capability. Black paths riser kit comes with 8x lift brackets, 4x lift spacers and hardware kit. Compatible with 2005-2009 honda trx500 foreman models with independant rear suspension. Cnc machined from solid billet aluminum to exact specifications, then anodized black for protection against the elements. Black path honda riser plate kit.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.