(2009-2011) BMW S1000RR Carbon Fiber Upper Rear Seat Top Tail Bodywork Fairing
- Flex resin for easier installation (epoxy resin binding). This listing is for (1) upper rear seat tail fairing, retains the use of the stock taillight and license holder. Cured using autoclave and finished with a high-gloss clear coat / uv protective coating to prevent bleaching from the sun. Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). 2 x 2 plain weave.
2009 2010 2011 BMW S1000RR Carbon Fiber Rear Seat Under Tray Tail Fairing Panel
- Flex resin for easier installation (epoxy resin binding) 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Works with the stock (original) upper tail section or the ssr upper tail section this listing is for (1) under seat tray. Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun. Made of high quality (pre-peg) carbon fiber with fiber glass backing.
Bestem CBBM-S1K-HGD-T Carbon Fiber Heel Guards for BMW S1000RR 2009 – 2014
- To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and it is test-installed. Bestem bmw s1000rr carbon fiber chain guard in twill weave will give your motorcycle that special custom look. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Fits bmw s1000rr. This part is made from 100 percentage high quality 3k carbon fiber. Uvc topcoat layer is used to protect the carbon fiber from fading, as is the problem with cheaper polyester or vinyl carbon fiber on the market today.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Side Tank Panels
- This carbon fiber tail side fairings are specifically designed for bmw s1000rr (15-17). Made of the highest 3k twill carbon fiber material, the tail side fairings are uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. Includes aluminum insert.
Bestem CBBM-S1K-HGCG-T Black Carbon Fiber Rear Hugger with Twill Weave Chain Guard for BMW S1000RR 2009 – 2015 S1000R 2014 – 2015
- Bestem has been in the motorcycling industry for over 6 years and has grown to be one of the largest carbon fiber manufactures and distributors in the usa. This part is made from high quality 3k carbon fiber with sulfate-free fiber glass backing. To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and bestem has test-installed all of these final products before they are ready for market. Bestem bmw s1000rr carbon fiber real hugger with chain guard in twill weave will give your motorcycle that special custom look. Bestem’s own special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Bestem also uses a uvc topcoat layer to protect the carbon fiber from fading, as it is a problem with cheaper polyester or vinyl carbon fiber on the market today. Most of us ride motorcycles, so bestem understands the viewpoint and needs of customers. Fits bmw s1000rr.
Bestem CBBM-S1K-TKC-MT Carbon Fiber Front Tank Cover for BMW S1000RR 2009 – 2014
- This part is made from 100 percentage high quality 3k carbon fiber. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Fits bmw s1000rr. Bestem bmw s1000rr carbon fiber front tank cover in twill weave will give your motorcycle that special custom look.
Bestem CBBM-S1K-FFD-MT Carbon Fiber Front Fender for BMW S1000RR 2009 – 2015 S1000R 2014 – 2015 S1000XR
- Bestem bmw s1000rr carbon fiber front fender in twill weave will give your motorcycle that special custom look. Fits bmw s1000rr. This part is made from 100 percentage high quality 3k carbon fiber with sulfate-free fiber glass backing. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use.
2009 – 2011 BMW S1000RR Carbon Fiber Tail Fairing
- This carbon fiber tail fairing is specifically designed for bmw s1000rr (09-11). Made of the highest 3k 100% carbon fiber material, the tail fairing is uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency.
Bestem CBBM-S1K-HGR-ATM 100% Autoclave Twill Weave Carbon Fiber Hugger for BMW S1000RR HP4
- This part is made from 100 percentage high quality 3k carbon fiber. Bestem bmw s1000rr carbon fiber hugger in twill weave will give your motorcycle that special custom look. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Fits bmw s1000rr.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Tail Side Fairings
- Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the tail side fairings are uv-protected and prevented from yellowing. This carbon fiber tail side fairings are specifically designed for bmw s1000rr (15-17). Includes aluminum insert.
2009 – 2011 BMW S1000RR Carbon Fiber Racing Tail Fairings
- This carbon fiber racing tail fairing is specifically designed for bmw s1000rr (09-11). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k carbon fiber material, the racing tail fairing is uv-protected and prevented from yellowing.
(2009-2014) BMW S1000RR Carbon Fiber Race Integrated Tank Fuel Cover and Side Panel Fairing
- 2 x 2 plain weave. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Flex resin for easier installation [race approved 1-piece design (must drill your own holes)]. Manufactured using autoclave and finished with a high-gloss clear coat. Uv protective coating.
(2010-2014) BMW S1000RR Carbon Fiber Fibre Headlight Front Fairing Cowl & Center Air Ram Dam
- Manufactured using autoclave and finished with a high-gloss clear coat. Center air ram equipped with protective grill. Uv protective coating / 2 x 2 plain weave. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Direct replacement for your stock headlight fairing and center air ram.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Fairing
- Made of the highest 3k carbon fiber materials. Installation hardware is not included require double-sided tape or adhesive rtv silicone for proper installation. 2×2 twill weave. Fits bmw s1000rr (15-17). Carbon fiber materials may require slight filing during installation.
(2009-2014) BMW S1000RR / HP4 Carbon Fiber Fibre Lower Belly Fairing Pan
- Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Brand new carbon fiber belly pan set (this is a two-piece design made after the stock belly pan). Manufactured using vacuum bagging and finished with a high-gloss clear coat.
(2009-2016) BMW S1000RR S1000R (100%) Carbon Fiber Fibre Rear Passenger Pillion Replacement Seat Cover Top
- 2 x 2 plain weave / reuses the stock locking system. Made of 100% high quality (pre-peg) carbon fiber. Flex resin for easier installation (epoxy resin binding) / this listing is for (1) rear seat tail replacement cover. Uv protective coating to prevent bleaching from the sun. Cured using autoclave and finished with a high-gloss clear coat.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Lower Side Fairings
- 2×2 twill weave. Made of the highest 3k carbon fiber materials. Carbon fiber materials may require slight filing during installation. Installation hardware is not included require double-sided tape or adhesive rtv silicone for proper installation. Fits bmw s1000rr (15-17).
2012 2013 2014 BMW S1000RR Carbon Fiber Twill Side Panel Infill Cover Fairing Set
- Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). Vacuumed bagged, cured using autoclave, and finished with a high-gloss clear coat. 2 x 2 twill weave (same weave and gloss finish as bmw hp4 & hp high performance carbon parts). Prevent bleaching (yellowing) from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1 set) left & right side panels, reuses the stock logo badges and turn signals.
(2015+) BMW S1000RR (100%) Carbon Fiber Fibre Left & Right Headlight Cowl Bodywork Fairing
- Made of 100% high quality (pre-preg) carbon fiber. 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1) left & right headlight cowl fairing / [scroll down to see fitment chart].
2009 2010 2011 2012 2013 2014 2015 2016 Bmw S1000rr Carbon Fiber Better Than Fender Eliminator
- Brand new carbon fiber license plate holder. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Manufactured using vacuum bagging and finished with a high-gloss clear coat.
(2015-2017) BMW S1000RR (100%) Carbon Fiber Fibre Side Panel Infill Cover Fairing Set
- This listing is for (1 set) left & right side panels, reuses the stock logo badges and turn signals. 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). [Scroll down to see fitment chart] / made of 100% high quality, pre-preg carbon fiber. Cured using autoclave and finished with a high-gloss clear coat.
(2015-2016) BMW S1000RR (100%) Carbon Fiber Fibre Lower Bodywork Belly Pan Fairing
- This listing is for (1 set) left & right lower belly pan fairings with pre-installed heat foil. Cured using autoclave and finished with a high-gloss clear coat. Flex resin for easier installation (epoxy resin binding) / 2 x 2 plain weave. Uv protective coating to prevent bleaching from the sun. [scroll down to see fitment chart] / made of 100% high quality, pre-preg carbon fiber.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover
- This carbon fiber front tank cover is specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the front tank cover is uv-protected and prevented from yellowing.
BMW (2009-2014) S1000RR/ HP4 Carbon Fiber Fibre Heel Guard Plate Rearset (TYPE 2)
- Made of high quality (pre-preg) carbon fiber with fiber glass backing. Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1) left heel guard (1) right heel guard / [scroll down to see fitment chart]. 2 x 2 plain weave (this is the typical size and weave pattern used on oem).
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Mid Side Fairings
- This carbon fiber mid side fairings are specifically designed for bmw s1000rr (15-17). Made of the highest 3k twill carbon fiber material, the mid side fairings are uv-protected and prevented from yellowing. Includes aluminum insert. Pre-drilled holes and coating are in place to ensure finish consistency.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Tail Panel
- This carbon fiber rear tail panel is specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the rear tail panel is uv-protected and prevented from yellowing.
(2015+) BMW S1000RR (100%) Carbon Fiber Fibre Upper Side Infill Panel Cover Fairings
- 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). Cured using autoclave and finished with a high-gloss clear coat. [Scroll down to see fitment chart] / made of 100% high quality (pre-preg) carbon fiber. This listing is for (1 set) left & right upper side infill panel cover fairings.
Bestem CBBM-S1K-EGCL-MTR Carbon Fiber Left Racing Engine Cover for BMW S1000RR HP4 2009 – 2014
- Bestem bmw s1000rr carbon fiber engine cover left racing in twill weave will give your motorcycle that special custom look. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Uvc topcoat layer is used to protect the carbon fiber from fading, as is the problem with cheaper polyester or vinyl carbon fiber on the market today. To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and it is test-installed. This part is made from 100 percentage high quality 3k carbon fiber. Fits bmw s1000rr.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Under Tail Fairing
- This carbon fiber under tail fairing is specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency. Includes aluminum insert. Made of the highest 3k twill carbon fiber material, the under tail fairing is uv-protected and prevented from yellowing.
2009 – 2011 BMW S1000RR Carbon Fiber Under Tail Fairing
- Made of the highest 3k carbon fiber material, the under tail fairing is uv-protected and prevented from yellowing. This carbon fiber under tail fairing is specifically designed for bmw s1000rr (09-11). Pre-drilled holes and coating are in place to ensure finish consistency.
09 10 11 12 13 14 15 16 17 BMW S1000RR HP4 Carbon Fiber Fibre Heel Guard Plate Rearset
- Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Manufactured using vacuum bagging and finished with a high-gloss clear coat. Brand new carbon fiber heel guards (this is for a complete set, left & right heel guard).
2015 2016 2017 BMW S1000RR Carbon Fiber Fibre Twill Upper Side Infill Panel Cover Fairings
- Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). 2 x 2 twill weave (same weave and gloss finish as bmw hp4 & hp high performance carbon parts). Vacuumed bagged, cured using autoclave, and finished with a high-gloss clear coat. This listing is for (1 set) left & right upper side infill panel cover fairings. Prevent bleaching (yellowing) from the sun / flex resin for easier installation (epoxy resin binding).
MDI Carbon fiber Front Sprocket Cover for BMW S1000RR
- Vacuum bagging with infusion process (not wet layering). Made with real 3k carbon fiber fabric (not imitation vinyl or fake carbon sticker),. Each product is protected with a uv coating to allow part to hold it’s high gloss finish. Epoxy resin and fiberglass.
(2009-2011) BMW S1000RR Carbon Fiber Fibre Side Panel Infill Cover Fairing Set
- Made of high quality (pre-preg) carbon fiber with fiber glass reinforced backing. Fitment s1000rr (2009-2011) / will fit the following but changes the look of the motorcycle s1000rr (2012-2014) / hp4 (all years). Flex resin for easier installation (epoxy resin binding) / 2 x 2 plain weave (this is the typical size and weave pattern used on oem). This listing is for (1 set) left & right side panels, reuses the stock logo badges & turn signals. Cured using autoclave and finished with a high-gloss clear coat /, uv protective coating to prevent bleaching from the sun.
(2009 – 2017) BMW S1000RR S1000R Carbon Fiber Rear Tire Hugger Fender Splashguard Mudguard
- Flex resin for easier installation (epoxy resin binding). Uv protective coating to prevent bleaching from the sun. 2 x 2 plain weave. Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). Cured using autoclave and finished with a high-gloss clear coat.
Bestem CBBM-S1K-TSP-MT Carbon Fiber Tank Side Panels for BMW S1000RR 2009 – 2014
- Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. This part is made from 100 percentage high quality 3k carbon fiber with sulfate-free fiber glass backing. Bestem bmw s1000rr carbon fiber tank side panels in twill weave will give your motorcycle that special custom look. Fits bmw s1000rr.
(2015-2017) BMW S1000RR Carbon Fiber Fibre Center Headlight Air Ram Intake Inlet Fairing
- Made of high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). 2 x 2 plain weave (this is the typical size and weave pattern used on oem). This listing is for (1) center headlight air ram intake inlet bodywork fairing. [Scroll down to see fitment chart] / cured using autoclave and finished with a high-gloss clear coat.
Bestem CBBM-S1K-CGD-AT Carbon Fiber Chain Guard for BMW S1000RR HP4
- To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and it is test-installed. Bestem bmw s1000rr carbon fiber chain guard in twill weave will give your motorcycle that special custom look. Fits bmw s1000rr. This part is made from high quality 3k carbon fiber with sulfate-free fiber glass backing. Uvc topcoat layer is used to protect the carbon fiber from fading, as is the problem with cheaper polyester or vinyl carbon fiber on the market today. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use.
MDI Carbon fiber Front Fender for BMW S1000RR
- Made with real 3k carbon fiber fabric (not imitation vinyl or fake carbon sticker),. Epoxy resin and fiberglass. Each product is protected with a uv coating to allow part to hold it’s high gloss finish. Vacuum bagging with infusion process (not wet layering).
(2009-2017) Bmw S1000rr Carbon Fiber Fibre Heel Guard Plate Rearset
- Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Manufactured using vacuum bagging and finished with a high-gloss clear coat. Brand new carbon fiber heel guards (this is for a complete set, left & right heel guard).
(2009-2014) BMW S1000RR / (2014 – 2016) S1000R Carbon Fiber Swingarm Panel Cover Guard with Lower Chaingaurd
- Integrated lower chain guard built into the design of the left side swingarm cover. 2 x 2 plain weave / flex resin for easier installation (epoxy resin binding). This listing comes with (1) left side swingarm cover (1) right side swingarm cover. Made of high quality (pre-peg) carbon fiber with fiber glass backing / cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun.
(2010-2014) Bmw S1000rr HP4 Carbon Fiber Fibre Side Panel Fairing Cover
- Brand new carbon fiber under-tank side panels (you get both left & right panels). Due to the large dimension of the product, this item will be shipped with ups ground only please select standard shipping method. Manufactured using vacuum bagging and finished with a high-gloss clear coat. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
